A problem with a guitar cable is highly UNlikely to be that. I think, of all of the guitar cables I've ever troubleshot and fixed, in my entire life, that only ONE has ever finally been deduced to be a broken cable. It was a sorry piece of crap cable too, that I should never have pressed into service in the first place.
Way I see it, my voltmeter and a box of connectors has been well worth the investment vs return on my budget. (and Dglenn's is NOT going to be better)
A device that can tell me where the break in a cable is, might be worth it if it lets me salvage and recycle an exceptionally long cable (assuming that's what's borked about it and that's <1% of all the borked cableage I've played with). EXCEPT, that by the time I've spent the $ for a TDR, I could have replaced all of my cables with better ones, and probably upgrade my amp too. Who needs salvage diagnostics when you got that kind of budget?
You wanna salvage a guitar cable? For (sometimes) less than the cost of a new one, you can just lop off the connectors and solder on new ones and have a >99% success rate. If you want to save money on that process, 10 minutes of manual inspection and or voltmeter time WILL tell you WHICH connector is broken. For that small percentage where the connector is NOT the problem, putting that cable into the dumpster is the shortest, fastest, most reliable, fix you can do yourself. And the drama you save yourself is well worth living without a TDR. A guitar cable with an internal break isn't going to be worth saving. Knowing where it broke this time is unimpressive if you fix it and it breaks again, which it probably will.
Connectors wear out, even on nice cables. No biggie. But Bad cable doesn't belong in your box when you gotta gig.
(no subject)
(no subject)
A problem with a guitar cable is highly UNlikely to be that.
I think, of all of the guitar cables I've ever troubleshot and fixed, in my entire life, that only ONE has ever finally been deduced to be a broken cable. It was a sorry piece of crap cable too, that I should never have pressed into service in the first place.
Way I see it, my voltmeter and a box of connectors has been well worth the investment vs return on my budget. (and Dglenn's is NOT going to be better)
A device that can tell me where the break in a cable is, might be worth it if it lets me salvage and recycle an exceptionally long cable (assuming that's what's borked about it and that's <1% of all the borked cableage I've played with). EXCEPT, that by the time I've spent the $ for a TDR, I could have replaced all of my cables with better ones, and probably upgrade my amp too. Who needs salvage diagnostics when you got that kind of budget?
You wanna salvage a guitar cable? For (sometimes) less than the cost of a new one, you can just lop off the connectors and solder on new ones and have a >99% success rate. If you want to save money on that process, 10 minutes of manual inspection and or voltmeter time WILL tell you WHICH connector is broken. For that small percentage where the connector is NOT the problem, putting that cable into the dumpster is the shortest, fastest, most reliable, fix you can do yourself. And the drama you save yourself is well worth living without a TDR. A guitar cable with an internal break isn't going to be worth saving. Knowing where it broke this time is unimpressive if you fix it and it breaks again, which it probably will.
Connectors wear out, even on nice cables. No biggie. But Bad cable doesn't belong in your box when you gotta gig.
(no subject)